Kyocera ECOSYS P6230cdn P6230cdn Operation Guide - Page 52
Installing and Setting up the Machine > Network Setup, Auto-IP, IMPORTANT
View all Kyocera ECOSYS P6230cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Installing and Setting up the Machine > Network Setup 11Set the default gateway. NOTE You can set any value between 000 and 255. Select the [▲] or [▼] key to enter a number. Select the [◄] or [►] key to move the cursor left or right. 12Select the [OK] key. 13[▲] [▼] key > [Auto-IP] > [OK] key 14[Off] > [OK] key IMPORTANT After changing the setting, restart the network from System Menu, or turn the machine OFF and then ON. Restart Printer (page 7-4) NOTE Ask your network administrator for the IP address in advance, and have it ready when you configure this setting. In the following cases, set the IP address of DNS server on the Command Center RX. • When using the host name with "DHCP" setting set to "Off" • When using the DNS server with IP address that is not assigned by DHCP automatically. Setting the IP Address of the DNS Server, refer to the following: Command Center RX User Guide 2-17