Kyocera FS C5020N FS-C5020/C5030 Operation Guide (Advanced Edition) - Page 113
Duplex Printing Error Detection Setting, Others, >Finishing, Error, >>Duplex
View all Kyocera FS C5020N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Using the Operator Panel immediately without any time interval. You can use Z and Y to move the cursor right and left. 8 Display the desired time and press [ENTER]. 9 Press [MENU]. The display returns to Ready. Duplex Printing Error Detection Setting If the error detection setting for duplex printing has been turned On, and you attempt to print onto a paper size and paper type that cannot be used for duplex printing, the Duplex disabled Press GO error message will be displayed and printing will stop. To print onto one-side of the paper only when this message is displayed, press [GO]. The default setting is Off. 1 Press [MENU]. 2 Press U or V repeatedly until Others > appears. Others > 3 Press Z. 4 Press U or V repeatedly until >Finishing Error > appears. >Finishing > Error 5 Press Z and display >>Duplex. >>Duplex Off 6 Press [ENTER]. A blinking question mark (?) appears. >>Duplex ? Off 7 Press U or V to change Off to On. >>Duplex ? On 8 Press [ENTER]. 9 To exit the menu selection, press [MENU]. ADVANCED OPERATION GUIDE 2-85