Kyocera FS C5020N FS-C5020/C5030 Operation Guide (Advanced Edition) - Page 99
Setting the Paper Weight, Setting the Duplex Path
View all Kyocera FS C5020N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Using the Operator Panel Setting the Paper Weight You can set the paper thickness for your custom paper type to be customized. 1 Display the custom paper type (see Creating Custom Paper Type on page 2-70) and press Z. 2 Press U or V repeatedly until >>Paper Weight appears. >>Paper Weight Normal 1 3 Press [ENTER]. A blinking question mark (?) appears. >>Paper Weight ? Normal 1 4 Press U or V to display the desired paper thickness. The display changes as shown below. For details of the default setting for each paper type, see Paper Availability on page 1-2. Light Normal 1 Normal 2 Normal 3 Heavy 1 Heavy 2 Heavy 3 Extra Heavy 5 When the desired paper thickness is displayed, press [ENTER]. 6 Press [MENU]. The display returns to Ready. If the optional duplexer is installed on the printer, duplex printing can be enabled and disabled. See Setting the Duplex Path on page 2-71 on the following page. Setting the Duplex Path NOTE: To use this function, the optional duplexer must be installed on the printer. If the optional duplexer is installed on the printer, you can set whether or not to enable duplex printing as follows. The default setting is Enable. 1 Display the custom paper type (see Creating Custom Paper Type on page 2-70) and press Z. 2 Press U or V repeatedly until >>Duplex path appears. >>Duplex path Enable ADVANCED OPERATION GUIDE 2-71