Kyocera FS-C5200DN FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC)
Kyocera FS-C5200DN Manual
View all Kyocera FS-C5200DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera FS-C5200DN manual content summary:
- Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 1
FS-C5100DN FS-C5200DN FS-C5300DN Operation Guide - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 2
- Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 3
Software (Windows PC 2-22 3 Maintenance General Information 3-2 Toner Container Replacement 3-2 Replacing the Waste Toner Box 3-6 Cleaning the Printer 3-8 4 Troubleshooting General Guidelines 4-2 Print Quality Problems 4-3 Error Messages 4-6 Clearing Paper Jams 4-12 5 Specifications iii - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 4
iv - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 5
or typographical errors in the present edition. No responsibility is assumed if accidents occur while the user is following the instructions in this guide. No responsibility is assumed for defects in the printer's firmware (contents of its read-only memory). This guide, any copyrightable - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 6
purposes at the address stated on the registration card you return to Monotype Imaging. three printers. If you need to have access to the fonts on more than three printers, accordance with Monotype Imagingpublished specifications, and the diskette will free from all bugs, errors and omissions. 8 THE - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 7
sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without CONDITIONS OF THIS AGREEMENT. GPL Firmware of this machine is using in part the GPL applied codes (www.fsf.org/copyleft/ acknowledgment: "This product includes software developed by the OpenSSL Project for use in - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 8
acknowledgment: "This product includes software developed by the OpenSSL Project for use BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 9
4 If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 10
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is operation of the device. * The above warning is valid only in the United States of America. Interface connectors IMPORTANT Be sure to power off the printer - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 11
covers, the laser beam cannot escape from the printer during any phase of user operation. Laser Notice This printer is certified in the U.S. to conform to the manufacturer (Kyocera Mita Corporation) hereby declare that this equipment (page printer), model FS-C5100DN, FS-C5200DN and FS-C5300DN are in - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 12
Cautionary Labels The printer bears any of the following labels. High temperature inside. Do not touch parts in this area, because there is a danger of getting burned. Label inside the printer (Laser radiation warning) For Europe, Asia, and other countries For U.S.A. and Canada xii - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 13
be attached to laser products marketed in the United States. Ozone concentration The printers generate ozone gas (O3) which may concentrate we recommend you not to install the printer in a confined area where ventilation is blocked. Safety Instructions Regarding the Disconnection of Power Caution: - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 14
beträgt 70 dB (A) oder weniger gemäß EN ISO 7779. Disclaimer Kyocera Mita will not be liable to customers or any other person or entity for interruption of service, loss of business or anticipatory profits, or consequential damages resulting from the use or operation of the equipment or - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 15
Control Function The device comes equipped with a Sleep Mode where printer functions remain in a waiting state but power consumption the Advanced Operation Guide. Paper Recycling This device supports the recycled paper which reduces the load on the environment. Your sales or service representative - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 16
power plug, clean the plug to avoid the danger of fire or electrical shock. Avoid locations near radiators, heaters, or other heat sources, or locations near flammable items, to avoid the danger of fire. To keep the printer cool and facilitate changing of parts and maintenance, allow access space - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 17
of fire or electrical shock in case of an electric short. If an earth connection is not possible, contact your service representative. Other Precautions Connect the power plug to the closest outlet possible to the printer. Handling of Plastic Bags WARNING Keep the plastic bags that are used with the - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 18
. • Always contact your service representative for maintenance or repair of internal parts cleaning operations. • If dust accumulates within the printer, there is a danger of fire or other trouble. It is therefore recommended that you consult with your service representative in regard to cleaning - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 19
any operations not explained in this handbook. • If the printer will toner. • If you get toner on your hands, do not rub your eyes or touch your mouth. Wash the toner from your hands. • For the disposal of the old toner container, consult your service technician or dispose of the toner or toner - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 20
replace the toner container and how to care for your printer. Chapter 4 - Troubleshooting This chapter explains how to handle printer problems that may occur, such as paper jams. Chapter 5 - Specifications This chapter lists the printer's specifications. Conventions This manual uses the following - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 21
correct use and optimal performance. This chapter contains explanations on the following topics: Components at the Front of the Printer 1-2 Components at the Left of the Printer 1-2 Internal Components 1-3 Components at the Rear of the Printer 1-3 Operation Panel 1-4 Machine Parts 1-1 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 22
of the Printer 1 2 34 5 7 6 1 Operation Panel 2 Front Cover 3 Paper Stopper 4 Top Cover (Top Tray) 5 MP (Multi-Purpose) Tray 6 Paper Cassette 7 Power Switch Components at the Left of the Printer 11 12 13 14 8 10 9 8 Left Cover 9 Waste Toner Box 10 Main Charger Units on the Drum Units 11 Magenta - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 23
Machine Parts Internal Components 15 16 18 17 15 Paper Transfer Unit 16 Paper Ramp 17 Duplex Unit 18 Envelope Switch Components at the Rear of the Printer 19 25 20 21 22 23 24 19 USB Memory Slot 20 Power Cord Connector 21 Option Interface Slot 22 Network Indicators 23 Network Interface - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 24
Operation Panel 26 27 28 30 31 33 34 29 32 26 Message Display 27 Ready Indicator 28 Data Indicator 29 Attention Indicator 30 Arrow Keys 31 [MENU] Key 32 [OK] Key 33 [GO] Key 34 [Cancel] Key 1-4 Machine Parts - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 25
2 Printing Operation This chapter contains explanations on the following topics: Changing Network Interface Parameters Printing a Network Interface Status Page Installing the Printer Driver Printing from Application Software 2-2 2-10 2-11 2-17 Printing Operation 2-1 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 26
Network >TCP/IP Off Changing Network Interface Parameters This printer supports TCP/IP, TCP/IP (IPv6), NetWare, AppleTalk, IPP, SSL Server, IPSec protocols and Security Level. (For details refer to Advanced Operation Guide.) Note After all network related settings have been done, turn the machine - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 27
cursor right and left. Note Check with your network administrator for the network address settings. 5 Press [OK]. 6 Press [MENU]. The display returns to Ready. Printing Operation 2-3 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 28
[MENU]. The display returns to Ready. NetWare, AppleTalk, IPP, SSL Server, IPSec and Security Level settings 1 Press [MENU]. > 2 Press U or V repeatedly until Security > appears. 2-4 Printing Operation - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 29
default, the administrator password is the numeric part of your printer's model name. If you use FS-C5300DN, enter "5300". >NetWare On Set this item to On when you connect to a network using NetWare. In > submenu, frame mode Operation Set this item to On when you connect to a network using - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 30
> On >>Frame Type Auto NetWare This section explains the procedure for enabling NetWare. 1 Enter the administrator ID and password. Then, if NetWare is set to Off, use U or V to select On and press [OK]. 2 Press and press [OK]. 5 Press [MENU]. The display returns to Ready. 2-6 Printing Operation - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 31
section explains the procedure for enabling AppleTalk. 1 Enter the administrator ID and password. Then, if AppleTalk is set to Off, use U or V to IPP This section explains the procedure for enabling IPP. 1 Enter the administrator ID and password. Then, if IPP is set to Off, use U or V to select On - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 32
the procedure for enabling SSL Server. > 1 Enter the administrator ID and password. Then, if SSL Server is set to Off, use U or V Ready. IPSec This section explains the procedure for enabling IPSec. 1 Enter the administrator ID and password. Then, if IPSec is set to Off, use U or V to select On. > - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 33
>Security Level High Security Level Security Level is primarily a menu used by service personnel for maintenance work. There is no need for customers to use this menu. Printing Operation 2-9 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 34
quality and to carry out printer maintenance. The options available in Adjust/Maintenance are as follows: • Color Calibration • Registration Normal • Registration Details • Restart Printer • Service IMPORTANT Service is primarily a menu used by service personnel for maintenance work. There is no - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 35
Printing Operation Installing the Printer Driver Ensure the printer is plugged in and connected to the PC before installing the printer driver from the CD-ROM. Installing the Software in Windows If you are connecting this printer to a Windows PC, follow the next steps to install the printer driver. - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 36
can also specify the device settings after you exit the installation. For details, refer to Device Settings in the printer driver operation manual on the CD-ROM. This completes the printer driver installation procedure. Follow the on-screen instructions to restart the system, if required. Printing - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 37
the Fonts checkbox in the installation window. 1 Select Custom Mode. 2 Following the instructions in the install wizard window, select the software packages to be installed and the specify the port, etc. For details, refer to Custom Installation in the printer driver operation manual on the CD-ROM - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 38
, Installation Type and then install the printer driver as directed by the instructions in the installation software. Note In addition Authenticate screen, enter the name and password used to log in to the operating system. This completes the printer driver installation. Next, specify the print - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 39
10 Click the IP icon for an IP connection or the AppleTalk icon for an AppleTalk connection and then enter the IP address and printer name. 11 Select the installed printer driver and click Add. 12 Select the options available for the printer and click Continue. Printing Operation 2-15 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 40
13 The selected printer is added. This completes the printer setup procedure. 2-16 Printing Operation - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 41
below. You can select the printing Paper Size and Output Destination. 1 Load the paper required printer settings for the Default tray. 3 4 5 To start printing, click OK. Note For information on how to use the printer driver software, refer to KX Printer Driver User Guide. Printing Operation - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 42
and provides an ongoing reporting function. It also allows you to specify and modify settings for printers not included in the KX driver. The Status Monitor is installed automatically during KX driver installation. Accessing the Status Monitor Use either of the methods listed below to launch the - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 43
the Status Monitor icon. Configure... If the printer is connected to a TCP/IP network and Operation Guide. Preferences... Specify the Sound Notification and Appearance settings for the Status Monitor. For details, refer to Status Monitor Settings on page 2-20. Kyocera Online Accesses the Kyocera Mita - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 44
you would like to hear played for events. Although a sound file is unnecessary, this function is applicable for Windows XP or later. To use this function, follow these steps. 1 Select Enable Event Notification. 2 Select an to confirm the sound or text is played correctly. 2-20 Printing Operation - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 45
Appearance Tab The Appearance tab is contains the following items. Enlarge window Doubles the size of the Status Monitor window. Always on top Positions the Status Monitor in front of other active windows. Transparency Displays the Status Monitor as a transparent window. Printing Operation 2-21 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 46
the procedure used to install the printer driver, click Remove Software. The Kyocera Uninstaller wizard appears. 4 Select the software package to remove. 5 Click Uninstall. Note In Windows Vista, the Remove Driver and Package screen appears. Select Remove driver and driver package, and click OK. The - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 47
3 Maintenance This chapter contains explanations on the following topics: General Information 3-2 Toner Container Replacement 3-2 Replacing the Waste Toner Box 3-6 Cleaning the Printer 3-8 Maintenance 3-1 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 48
• Toner Kits • Waste Toner Box Also, the following parts need periodic cleaning: • Paper Transfer Unit Note Information Collection on Memory Chips - The memory chip attached to the toner container is designed to improve convenience for the end user; to support the recycling operation of empty toner - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 49
000 images 10,000 images 10,000 images Note The toner container packed with the new printer has to fill up the system when operating the first time. Therefore only 50% of the first toner kits can be used for printing. (For example: FSC5200DN can print 3,500 monochrome images using the black starter - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 50
IMPORTANT Kyocera Mita Corporation is not liable against any damages or problems arising from the use of toner containers other than those designated as original Kyocera toner containers. For optimum performance, it is also recommended to use only the Kyocera toner containers which are specifically - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 51
. Do not press too firmly on the center of the toner container or touch the toner feed slot. Toner Feed Slot 6 Set the new toner container in the printer as shown in the figure below. Maintenance 7 Push down on the top of the toner container to install it firmly in place. Use the same procedure - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 52
Box Replace the waste toner box when the Check waste toner box message is displayed. A new waste toner box is included with the toner kit. The waste toner box needs to be replaced before the printer will operate. 1 Open the left cover. Left Cover 2 While holding the waste toner box, press the lock - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 53
is set correctly, it will snap into place. 7 Make sure that the waste toner box is correctly inserted and close the left cover. After replacing the toner containers and the waste toner box, clean the paper transfer unit. For instructions, refer to Cleaning the Printer on page 3-8. Maintenance 3-7 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 54
that the inside of the printer be cleaned once a month as well as when the toner container is replaced. It should also be cleaned if streaking or lines appear on printed copies, or if printouts appear faint or blurred. Cleaning the Paper Transfer Unit Print problems such as soiling of the - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 55
paper ramp using the cleaning cloth. Paper Transfer Unit Duplex Unit Cleaning Cloth Paper Ramp Transfer Belt (Black) Registration Roller (Metal) Transfer Roller (Black) Note Be careful not to touch the black transfer roller and black transfer belt during cleaning as this may adversely affect - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 56
3-10 Maintenance - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 57
4 Troubleshooting This chapter contains explanations on the following topics: General Guidelines Print Quality Problems Error Messages Clearing Paper Jams 4-2 4-3 4-6 4-12 If a problem cannot be corrected, contact your service technician. Troubleshooting 4-1 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 58
and application software. Try printing another file or using another print command. If the problem occurs only with a specific file or application, check the printer driver settings for that application. The printer is emitting steam in the area around the top tray. Check the room temperature to - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 59
the main charger unit. Open the left cover and check that the main charger unit is correctly installed. Dropouts or stray dots Clean the main charger units. For details, refer to LSU/Charger (LSU/Main charger cleaning mode setting) section of the Advanced Operation Guide. Troubleshooting 4-3 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 60
charger cleaning mode setting) section of the Advanced Operation Guide. Refresh drum. Perform the following procedures on the operation panel and try cleaning the drum surface using the printer's built-in cleaning system. 1 Press [MENU]. 2 Press U or V repeatedly until Adjust/Maintenance > appears - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 61
ramp. Clean the paper ramp using a soft, dry, lint-free cloth. For details, refer to Cleaning the Paper Transfer Unit on page 3-8. Clean the main charger units. For details, refer to LSU/Charger (LSU/Main charger cleaning mode setting) section of the Advanced Operation Guide. Troubleshooting 4-5 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 62
Call for service. The printer does not operate when this message is displayed. The total number of pages printed is also indicated, e.g. 0123456. Displayed when data is being canceled. Cassette # not loaded Change envelope switch position Check cassette # Check waste toner box Clean printer Press - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 63
Accounting selection/setting) section of the Advanced Operation Guide. Displayed when the envelope switch is set to envelope mode. Error.Power off. F### Error.Power off. F000 Exceeded Max.out Press GO File not found Press GO Format error Hard disk Format error Memory card Hard disk err ## Press GO - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 64
account. To return the printer to the print-ready status, press [GO]. For more information, refer to Job Accounting (Job Accounting selection/setting) section of the Advanced Operation Guide. Current print processing cannot continue because of occurrence of KPDL error which is categorized by ##. To - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 65
refer to Storage Error Codes on page 4-10. To ignore the RAM disk error, press [GO]. Two message items are displayed alternately. Toner has run out in the toner container(s). Replace the toner container using a new toner kit for the particular color. The printer does not operate when this message - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 66
ID that you specified on the printer driver. The password does not match the password set. Enter the correct password. For more information, refer to Job Accounting (Job Accounting selection/setting) section of the Advanced Operation Guide. Storage Error Codes Hard Disk Errors Code 01 02 04 05 06 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 67
and USB Memory Errors Code 01 02 03 04 05 06 50 Meaning The printer does not support the memory card inserted, or the memory card is broken. Insert the correct memory card. For more information, refer to Memory Card (Using the memory card) section of the Advanced Operation Guide. The memory card - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 68
jam Cassette 2 (to 4) (Only 2 stacked paper feeders can be used with the FS-C5100DN) Description Reference Page Paper is jammed inside the printer, paper cassette or MP tray. page 4-13 page 4-14 page 4-15 Paper is jammed at the optional paper page 4-15 feeder's cassette. 4-12 Troubleshooting - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 69
Troubleshooting paper stack 180 degrees. The printer may have problems if paper jams recur after in the printer's message display to provide simple instructions for clearing printer's front cover and check for paper jams in the paper transfer unit. For more information, refer to Paper Jam in Printer - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 70
Cover 3 If the paper has jammed near the registration roller, as shown in A, remove the paper by pulling it up from the center. Registration Roller If the paper has jammed inside the fuser unit, as shown in B, open the fuser cover and remove the paper by pulling its edge. 4-14 Troubleshooting - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 71
If the paper has jammed inside the duplex unit, as shown in C, lift the duplex unit and remove the paper by holding it in the middle. 4 Close the front cover. Paper Jam at Cassette 2 (to 4) Paper is jammed at the paper cassette. Remove the jammed paper using - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 72
4-16 Troubleshooting - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 73
5 Specifications Note Specifications are subject to change without notice. Item Description FS-C5100DN FS-C5200DN FS-C5300DN Printing Method Printing Speeds Cassette MP Tray Duplex Printing Speed Electrophotographic four color (CMYK) printing using tandem (4) drum system A4: 21 ppm, B5, A5 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 74
Item Description FS-C5100DN FS-C5200DN FS-C5300DN Paper Sizes Cassette A4, B5, A5, Folio, 8 1/2 × 14"(Legal), 8 1/2 × 11"(Letter), Oficio II, Statement, Executive, ISO B5, A6, Envelope C5, 16K, and Custom Cassette Envelope Monarch, Envelope #10, Envelope #9, Envelope #6, Envelope DL, Envelope - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 75
FS-C5100DN FS-C5200DN FS-C5300DN Operating Noise†† During Printing LpA = 53 dB (A) During Standby LpA = 36 dB (A) During immeasurably low Sleep Mode the MP tray for paper sizes smaller than 105 × 148 mm (4 1/8 × 5 13/16 inches). The MP tray can be used with paper sizes over 70 × 138 mm - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 76
5-4 Specifications - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 77
We recommend the use of our own brand supplies. We will not be liable for any damage caused by the use of third party supplies in this machine. A1 - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 78
- Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 79
2008 is a trademark of Kyocera Corporation - Kyocera FS-C5200DN | FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 80
Rev. 1.2 2009.8 Printed in China 302HN56012
Operation Guide
FS-C5100DN
FS-C5200DN
FS-C5300DN