Kyocera KM-C3232 C2520/C3225/C3232 Operation Guide (Advanced Edition) - Page 258

System Menu 4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Copy Default screen. Setting Margin Defaults Set margin the width default values. The setting ranges are as follows. Model Type Inch models Metric models Range 0 - 3/4" (1/8" increments) 0 - 18 mm (1 mm increments) For further details about margin mode, refer to page 1-17. 1 Referring to Accessing the Copy Default screen on page 7-2, access the Copy Default screen. 2 Press [S] or [T] to select Default margin width and press [Change #]. 3 Press [S], [T], [W] or [X] to set the margin width. 4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Copy Default screen. Erasing Borders Set the border erase default values. The setting ranges are as follows. Model Type Inch models Metric models Range 0 - 2" (1/8" increments) 0 - 50 mm (1 mm increments) For further details about border erase, refer to page 1-19. 1 Referring to Accessing the Copy Default screen on page 7-2, access the Copy Default screen. 2 Press [S] or [T] to select Default erase width and press [Change #]. 3 Press [+] or [-] to set the Border (outer edges) and Center (Centre) (middle) border widths. 4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Copy Default screen. Selecting Maximum Number of Copies Limits the number of sets that can be specified for a single copy. Set to between 1 - 999 sets. 1 Referring to Accessing the Copy Default screen on page 7-2, access the Copy Default screen. 2 Press [S] or [T] to select Preset limit and press [Change #]. 3 Use the numeric keys to specify the preset limit value. 4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Copy Default screen. 7-10