Kyocera KM-C3232 C2520/C3225/C3232 Operation Guide (Advanced Edition) - Page 79
Finish, Reducing/Enlarging, Original Orientation, Offset Group, Stapling, Bind and Staple, Punching
View all Kyocera KM-C3232 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3 Check the orientation of the original. NOTE: Incorrect copying may occur if the original is not placed correctly. Copy Functions 4 Press [Close]. Finish Set the Finish options. The following settings are available. • Offset (Group) - Each completed set is rotated 90 degrees to the next before stacking. • Stapling - Use the optional document finisher or 3000 sheet document finisher to staple the completed copies. • Bind and Staple - Use the optional 3000 sheet document finisher and folding unit to bind&fold (fold the finished copy in half and staple). • Punching - Use the 3000 sheet document finisher and punching unit to hole punch the completed copies. 1 Press [Basic]. On the next screen, press [Finished]. NOTE: Finish settings are common for all steps. It may only be configured as the first step. 2 For finishing, press [On] ([1 set]). For further details, refer to Offset Mode on page 1-9. For stapling, press [Staple Mode] and complete the settings. For further details, refer to Stapling on page 1-10. For punching, press [Punch Mode] and complete the settings. For further details, refer to Punching on page 1-12. For center margin stapling, press [Saddle Stitch] ([Centre Staple]). Press [Bind & Fold]. 3 Check the orientation of the original. NOTE: Incorrect copying may occur if the original is not placed correctly. 4 Press [Close]. Reducing/Enlarging Select the desired magnification. 1 Press [Basic]. On the next screen, press [Reduce/Enlarge]. 2 Select the desired magnification. For instructions on reducing/enlarging, refer to Reducing/Enlarging in Chapter 3 of Operation Guide. 3 Press [Close]. Original Orientation Check the orientation of the original. 1 Press [Basic]. On the next screen, press [Orig. Set Direction]. 2 Select [Top Edge] ([Back Edge]) or [Left Top Edge] ([Left top corner]). 1-63