Kyocera KM-C3232 C2520/C3225/C3232 Operation Guide (Advanced Edition) - Page 336
Printer, Display, Checkpoints, Corrective Actions, Reference, RAM disk error Press GO.
View all Kyocera KM-C3232 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 336 highlights
Troubleshooting Display Checkpoints Corrective Actions Reference Page Exceeded print quantity limit. Is the maximum limit for copying as To perform printing, reconfigure Job page 8-4 specified in Job Accounting mode Accounting for the machine. exceeded? Error has occurr. PLS change to printer screen and check. - Shown when a printer error has - occurred when other modes are currently being displayed. Press the Printer key to switch to the printer screen and display the specific error message. RAM disk error Press GO. Code: ## - (For further details, refer to RAM page 9-14 Disk Error on page 9-14.) Memory Card error Press GO. Code: ## - (For further details, refer to Memory page 9-14 Card Errors on page 9-14.) HARD DISK error Press GO. Code: ## - (For further details, refer to Hard page 9-14 Disk Errors on page 9-14.) KPDL error Press GO. - Unable to continue processing page 3-11 current print job. From the printer menu, open KPDL Error Print and select [On] to print an error report. Press [GO] to print data up to the point of error. If resume time has been configured for Auto Continue, printing resumes automatically after the set time has elapsed. Memory card error Insert again. Was the memory card (CompactFlash) removed during printer configuration? Insert the memory card. When page 3-27 inserting the memory card, turn off the main power switch. Insert the same Memory card. - Memory card (CompactFlash) could page 3-27 not be recognized when reading data from the memory card. Re-insert the memory card. When inserting the memory card, turn off the main power switch. Format error Memory card. - The inserted memory card page 3-27 (CompactFlash) requires formatting. Format the memory card. Option interface error Code: ## Is the installed option interface slot Switch the main power switch to off - incorrect? ({ position) and install in the correct slot. File not found Press GO. - A file error has occurred. Press - [GO]. Read Fonts: Failed - Unable to read font data. Try the font page 3-29 data read operation again. Read macro: Failed - Unable to read macro data. Try the page 3-29 macro data read operation again. Warning Low memory. - Memory is low. Print the status page - to confirm the current printer memory capacity. Delete unnecessary font or macro data. 9-12