Kyocera KM-C3232 C2520/C3225/C3232 Operation Guide (Advanced Edition) - Page 273
Changing Management Code, Accessing the Machine Default Screen, Machine Default
View all Kyocera KM-C3232 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 273 highlights
System Menu Changing Management Code Change the machine's management code. IMPORTANT: Be sure to record the management code when changing it. If forgotten, contact your Service Representative. NOTE: The default setting is 2500 for the 25/20 ppm model and 3200 for the 32/25 and 32/32 ppm models. Change the management code to a value between 0000 - 9999. Always set to 4 digits. If the optional security kit has been installed, the management code is 8 digits long. The default setting is 25002500 for the 25/20 ppm model and 32003200 for the 32/25 and 32/32 ppm models. Change the management code to a value between 00000000 - 99999999. Always set to 8 digits. It is recommended to not set the management code to an easily guessed number such as 11111111 or 12345678. The following settings require the management code to be entered. - Default Settings for Copying - Machine Default - Scanner Default Settings - Auto Gray Adjust - Color Registration - Developer Refresh - Printing Reports - Setting Document Management Defaults - Hard Disk Management - Job Accounting 1 Referring to Accessing the Machine Default Screen on page 7-13, access the Machine Default screen. 2 Press [S] or [T] to select Management code change (Change MGMT code with #) and press [Change #]. 3 Use the numeric keys to enter the new management code. 4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine Default screen. 7-25