LG 50144803 User Guide - Page 22

OW TO USE CONTROL PANEL FEATURES Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for more detailed information. Important warning: TO reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the Important Safety Instructions, before operating this dryer. O 0 POWER ON/OFF BUTTON O CYCLE SETTING BUTTONS Use these buttons to adjust the desired cycle settings for the selected cycle. Press to turn the dryer ON. Press again to turn the dryer OFR NOTE: Pressing the ON/OFF button during a cycle will cancel that cycle and any load settings will be lost. O TiME AND STATUS DISPLAY e CYCLE SELECTOR KNOB Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. On MANUAL DRY cycles, these settings can be adjusted using the cycle settings buttons anytime before starting the cycle. The display shows the settings, estimated time remaining, options, and status messages for your dryer. O OPTION BUTTONS O The option buttons allow you to select additional cycle options. Certain buttons also allow you to activate special functions by pressing and holding the button for 3 seconds. For detailed information about the individual options, please see the following pages. START/PAUSE BUTTON Press this button to START the selected cycle. If the dryer is running, use this button to PAUSE the cycle without losing the current settings. NOTE: If you do not press the START/PAUSE button to resume a cycle within 8 minutes, the dryer automatically turns off. O MORE TIME/LESS TIME BUTTONS Use these buttons with MANUAL DRY and TIME DRY cycles to adjust the drying time. Press the MORE TIME button to increase the selected manual cycle time by a minute; press LESS TIME to decrease the cycle time by a minute. 22