LG LDPS6762S Owners Manual - Page 11
Preparing Water and, Electrical Connections
![]() |
View all LG LDPS6762S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH • To ensure proper drainage, install the dishwasher no more than 12 ft. (3.65 m) from the sink. • The location must have sufficient space for the dishwasher door to open easily and provide at least 0.1" (2 mm) between the dishwasher and the cabinet sides. • If installing the dishwasher in a corner, leave a minimum of 2" (50 mm) between the dishwasher and the adjacent wall. • The adjacent wall must be free of obstructions. • For flush installations only, you may remove the cabinet brace a inside the cabinet. INSTALLATION 11 WARNING • Installation damage is not covered by the warranty, and leaks caused by improper installation may result in property damage. • Do not use existing holes unless they are in the target area. • Failure to properly locate the hole for the water and drain lines may prevent the dishwasher from installing flush with the cabinets and could result in kinked, pinched, crushed, stressed or damaged lines. Choosing the Proper Location 1 Select a location as close to the sink as possible for easy connections to water supply line, drain hose and electrical connection. 2 To allow for proper clearance of plumbing and electrical, use the template included with the literature to determine the clearance on the side of the cabinet where the cabinet meets the back wall. Using a 2 1/2" diameter hole saw, drill a hole in the target area as shown on the template. 3.5 '' 2.5 '' 4 '' Preparing Water and Electrical Connections WARNING • Water Connection - Do not reuse an old hose. Use only a new hose when installing the dishwasher. The old hose could leak or burst causing flooding and property damage. Contact an LG Customer Information Center for assistance in buying a new hose. • Electrical Connection - Use a time-delay fuse or circuit breaker. - Operate this appliance with the correct voltage as shown in this manual and on the rating plate. - The wiring must be grounded properly. If in doubt, have it checked by a qualified electrician. - Connect the appliance using 3-wires, including a ground wire. - The appliance and outlet must be positioned so that the plug is easily accessible. - Do not use an extension cable or adapter with this dishwasher. - Do not overload the outlet with more than one appliance. - The included 16AWG wire nuts should be used.
![](/manual_guide/products/lg-ldps6762s-owners-manual-a3227b9/11.png)