LG LDPS6762S Owners Manual - Page 18
Leveling Dishwasher
View all LG LDPS6762S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 INSTALLATION 3 Attach the drain hose to the disposal with the hose clamp provided. Move the hose clamp into position and tighten it with a flat-blade screwdriver. Connecting Waste Tee without Air Gap The height of the drain hose end must be at least 12" (305 mm) and within 40" (1016 mm) from the base of the dishwasher to avoid water being siphoned from the tub. 1 Remove the knockout plug with a hammer and screwdriver. CAUTION • If the knockout plug has not been removed, the dishwasher will not be able to drain properly. 2 Attach the drain hose to the waste tee with the hose clamp provided. Move the clamp into position and tighten it with a flat-blade screwdriver. Connecting to Disposal or Waste Tee with Air Gap 1 Remove the knockout plug with a hammer and screwdriver. 2 Connect the end of the drain hose a to the air gap b with the hose clamp provided. Move the clamp into position and tighten it with a flat-blade screwdriver. • This avoids water being siphoned from the tub. 3 If it is not connected, attach the rubber hose connector to the disposal or waste tee with a hose clamp (not provided). Leveling Dishwasher Check that the dishwasher is level and adjust the leveling feet if necessary. CAUTION • Failure to level the dishwasher may result in leakage, problems closing the door, or noise. • Where the cabinet opening is narrower than recommended (see Preparing Cabinet Opening), the dishwasher must be carefully leveled and aligned so that the dishwasher is supported fully by the 3 leveling feet and is not hanging from the installation brackets. Failure to do so can result in leaks from the front of the dishwasher, AE errors, difficulty in closing the door, or failure to operate.