LG LDPS6762S Owners Manual - Page 15
Connecting Water Supply, Line and Power
View all LG LDPS6762S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH 4 Gradually slide the dishwasher into the opening, making sure that the water supply line and electrical cable are passing freely through the channels and do not get caught under the dishwasher. CAUTION • To avoid malfunctions or leakage, it is important that the drain hose not get kinked, pinched, stressed or crushed behind or under the dishwasher or inside the neighboring cabinet. • Damage resulting from improper installation is not covered under the warranty. • As you slide the dishwasher into the opening, stop periodically (or have an assistant help) to take up the slack by pulling the drain hose farther into the cabinet. INSTALLATION 15 Connecting Water Supply Line and Power Connecting Water Supply Line 1 With the home water supply turned off, connect the water supply line to the inlet valve on the left front of the dishwasher. CAUTION • Tape or compound should not be used on dishwasher inlet valve. 2 Tighten the compression nut. 5 Remove the tape from the water supply line and the electrical cable. 3 Slide the water supply line back through the channel, pulling gently from inside the cabinet to make sure the line is not kinked, pinched, stressed or crushed. Connecting Power The dishwasher should have a dedicated properly grounded branch circuit to connect the 3 wire setup which includes the ground wire. If a 3-prong power supply is used, it should be in an accessible location adjacent to the dishwasher within 4 ft. (1.22 m) of the dishwasher side and not behind the dishwasher.