LG LDPS6762S Owners Manual - Page 37
Rinse Aid Dispenser Adjustment, Refilling the Rinse Aid
View all LG LDPS6762S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
ENGLISH OPERATION 37 2 Add a liquid rinse aid to the maximum fill level. Allow the rinse aid to settle in the dispenser while filling, or air bubbles may result in poor drying performance. Avoid overfilling the dispenser. NOTE • Adjust the setting higher if you have hard water and notice calcium buildup on your dishes. • Setting the rinse aid control too low will contribute to spotting and streaking on dishes and poor drying performance. • Setting the control too high can cause foaming, which will cause poor wash performance. 1 Ensure the appliance is off. 2 Press Power and Remote Start simultaneously to enter the Option Setting Mode. 3 Press Extra Dry to change the rinse aid dispenser setting. Each press of the button changes the setting one step from L0 to L4. 4 Once the desired rinse aid dispenser setting is selected, press Start to save. 3 Close the lid to lock the dispenser. Rinse aid is dispensed automatically during the final rinse cycle. Refilling the Rinse Aid How often the dispenser needs to be refilled depends on how often dishes are washed and the rinse aid setting used. • The Rinse Aid Refill LED flashes when more rinse aid is needed, unless the rinse aid dispenser setting is set to L0. Rinse Aid Dispenser Adjustment The dispenser has five adjustment levels. The dishwasher is programmed at the factory for a rinse aid dispenser level of 2. This can be checked and adjusted from the control panel.