Lantronix C6310-3340 C6310-3340 and S6310-3340 User Guide Rev A - Page 12
POTS Module Configurations
View all Lantronix C6310-3340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Lantronix x6310 ION POTS Media Converter User Guide Installing SFPs The ION x6310 lets you install a Gigabit Ethernet Small Form-Factor Pluggable (SFP) device of your choice in order to make a fiber connection. See the Lantronix SFP page for models, safety precautions, and warnings specific to your SFP model. See the related SFP manual for more information. Note: Do not remove and replace the SFP modules more often than necessary; excessive SFP removing and replacing can shorten the SFPs useful life. SFP Installation 1. Position the SFP device at either installation slot, with the label facing correctly. 2. Carefully slide the SFP device into the slot, aligning it with the internal installation guides. 3. Ensure that the SFP device is firmly seated against the internal mating connector. 4. Connect the fiber cable to the fiber port connector of the SFP device. Removing SFPs Caution: Be careful when removing the SFP from a device. Some SFP transceiver module temperatures may exceed 160°F (70°C) and be too hot to touch with bare hands. POTS Module Configurations The x6310 Series is a stand-alone or ION chassis media converter that provides an interface between a twisted pair RJ-11 port and a fiber port, allowing users to connect central-office voice grade signals to distant Plain Old Telephone equipment (POTS) utilizing standard telephone signaling. The x6310 is configurable to FXS Mode or FXO Mode. 33818 Rev. A https://www.lantronix.com/ Page 12 of 39