Lantronix C6310-3340 C6310-3340 and S6310-3340 User Guide Rev A - Page 17

Lantronix x6310 ION POTS Media Converter User Guide Recall Commands To recall recently entered commands from the command history, perform one of the optional actions below: Ctrl-P or Up arrow (↑) key: Recall commands in the history buffer, beginning with the most recent command. Repeat the key sequence to recall successively older commands. Ctrl-N or Down arrow (↓) key: Return to more recent commands in the history buffer after recalling commands with Ctrl-P or the Up arrow key. Repeat the key sequence to recall successively more recent commands. Commands Effect on Stored Files Note: Certain CLI commands affect important stored files. Doing a reboot, restart or upgrade of the C6310, a power restart of the chassis, or a reset to factory defaults will remove temporary files (e.g., configuration backup files, Syslog file). A Factory Reset also removes the permanent settings (e.g., configuration files, HTTPS certification file, SSH key). The following CLI commands can cause a loss of files: • reboot : warm start the system. • reset : reset factory configuration. See the specific command description for additional information. Command: show card info Description: Display card information. Syntax: show card info Parameters: None Example: ION219-TestLab C1|S18|L1D>go s=11 l1d ION219-TestLab C1|S11|L1D>show card info System name: Uptime: 22:38:12 MAC: 00-c0-f2-8f-81-40 Number of ports: 2 Serial number: 4545 Config mode: software Software: 2.0.0 Bootloader: 0.1.10 Hardware: 1.0.0 FPGA rev: 1.0.1 ION219-TestLab C1|S11|L1D> Command: show pots status Description: Display device's current POTS status. Syntax: show pots status Parameters: None Example: ION219-TestLab C1|S11|L1D>show pots status C6310 Emulation Mode: FXO C6310 Country Code: Region 1 (USA) ION219-TestLab C1|S11|L1D> 33818 Rev. A https://www.lantronix.com/ Page 17 of 39