Lantronix C6310-3340 C6310-3340 and S6310-3340 User Guide Rev A - Page 6

Lantronix x6310 ION POTS Media Converter User Guide x6310 Features • Audio transmission of voice grade signals • Supports ringing at distant end • Supports Caller ID • Configurable worldwide country formats • Must be deployed in pairs: o ION chassis card and stand-alone unit o ION chassis card and ION chassis card o Stand-alone unit and stand-alone unit • Single product configurable to FXO Mode or FXS Mode • Automatic Ring Down supported when both converters are configured to FXS Mode • SFP based product: o Uses Gigabit Ethernet SFP Modules o Lantronix offers a wide variety of SFP modules to support multimode or single-mode fiber, as well as dual or single strand fiber installations • SNMP Management supported when installed in a managed ION chassis • Supports remote management of paired unit, in-band, over the fiber • Electrical interface is provided through an RJ-11 female connector • Field upgradeable firmware • Only supports analog POTS lines • Compatible with traditional telephone modems x6310 Specifications Standards Analog Port FCC Part 68 ETSI ES 203-021 (TBR21) ISED CS-03 RJ11 Connector FXS Mode Impedance: 600 ohms REN: 1.0 Ring Cadence: 25 Hz FXO Mode Impedance: 600 ohms Battery Source: 48 VDC +/- 5V Ringing Supply: 90Vp-p Ring Frequency: 16-65 Hz DIP Switches DIP switches to set the Emulation Mode and Region Codes: SW1 Up = FXO; Down = FXS SW2 Up = Normal; Down = FXS Reversed SW3 Up = U-Law; Down = A-Law SW4 not used SW5 - SW8 Country Code Select 33818 Rev. A https://www.lantronix.com/ Page 6 of 39