Lantronix C6310-3340 C6310-3340 and S6310-3340 User Guide Rev A - Page 15

Software Installation and Operation

Get Lantronix C6310-3340 PDF manuals and user guides View all Lantronix C6310-3340 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Lantronix x6310 ION POTS Media Converter User Guide Software Installation and Operation Remote Management The C6310 slide-in card (SIC) can remotely manage the stand-alone (SA) S6310. For example, a local C6310 converter (that is installed in a managed Lantronix ION System chassis) is connected via fiber, to a remote S6310 converter. The ION x6310 can be managed with SNMP, the ION Command Line Interface (CLI) or the ION Web GUI. For CLI see CLI Commands on page 16. For Web UI see Web UI Operation on page 19. The C6310 is manageable in the ION chassis, while the SA cannot be managed on its own. Management of the remote converter (SA or SIC), in band, over the fiber, by the local chassis based managed converter is supported. The x6310 converters can be deployed as follows: • SA to SA No Management of local or remote • Card to SA Local SIC manages remote SA • Card to Card Local SIC manages remote SIC Note: See the IONMM User Guide for information on how to Install the USB Driver, Configure HyperTerminal, Starting a USB Session in HyperTerminal, Terminating a USB Connection from HyperTerminal, Access via an Ethernet Network, Starting a Telnet Session, Terminating a Telnet Session, and Initial Setup with a Static IP Address via the CLI. Firmware Upgrade (C6310 SIC Only) The C6310 firmware can be upgraded in the field. See the IONMM User Guide for details. 33818 Rev. A https://www.lantronix.com/ Page 15 of 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
Lantronix
x6310 ION POTS Media Converter User Guide
33818 Rev. A
Page
15
of
39
Software Installation and Operation
Remote Management
The C6310 slide-in card (SIC) can remotely manage the stand-alone (SA) S6310. For example, a local C6310
converter (that is installed in a managed Lantronix ION System chassis) is connected via fiber, to a remote S6310
converter. The ION x6310 can be managed with SNMP, the ION Command Line Interface (CLI) or the ION Web
GUI.
For CLI see
CLI Commands
on page
16
.
For Web UI see
Web UI Operation
on page
19
.
The C6310 is manageable in the ION chassis, while the SA cannot be managed on its own. Management of the
remote converter (SA or SIC), in band, over the fiber, by the local chassis based managed converter is supported.
The x6310 converters can be deployed as follows:
•
SA to SA
No Management of local or remote
•
Card to SA
Local SIC manages remote SA
•
Card to Card
Local SIC manages remote SIC
Note
: See the IONMM User Guide for information on how to Install the USB Driver, Configure HyperTerminal,
Starting a USB Session in HyperTerminal, Terminating a USB Connection from HyperTerminal, Access via an
Ethernet Network, Starting a Telnet Session, Terminating a Telnet Session, and Initial Setup with a Static IP
Address via the CLI.
Firmware Upgrade (C6310 SIC Only)
The C6310 firmware can be upgraded in the field. See the IONMM User Guide for details.