Lantronix SLC 8 Lantronix SLC - User Guide - Page 103
Console Port Commands, Host Lists
View all Lantronix SLC 8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
8: Devices Show Lines on Connecting Click the checkbox if you connect to the console port with a terminal emulator. You will see the last lines of output to the console. For example, the SLC boot messages or the last lines of output during a CLI session on the console. 3. Click the Apply button. Console Port Commands The following CLI commands correspond to the Console Port page. For more information, see Chapter 15: Command Reference. set consoleport (on page 219) show consoleport (on page 219) Host Lists A host list is a prioritized list of SSH, Telnet, and TCP hosts available for establishing incoming modem connections or for the connect direct command on the CLI. The SLC console manager cycles through the list until it successfully connects to one. To add a host list: 1. Click the Devices tab and the Host Lists option. Figure 8-10 shows the page that displays. Figure 8-10 Host Lists Page 2. Enter the following fields. SLC™ Console Manager User Guide 103