Lantronix SLC 8 Lantronix SLC - User Guide - Page 22

2: Overview Hardware Features The SLC hardware includes the following:  1U-tall (1.75 inches) rack-mountable secure console server  Two 10Base-T/100Base-TX network ports  Up to 48 RS-232 serial device ports connected via Category 5 (RJ45) wiring  One serial console port for VT100 terminal or PC with emulation  Two PC Card slots or one USB port  256 Kbytes-per-port buffer memory for device ports  LCD display and keypad on the front  Universal AC power input (100-240V, 50/60 Hz); options include single input, single supply or dual input, redundant supplies  -48 VDC power input, dual input, redundant power supplies  Convection cooled, silent operation, low power consumption Note: For more detailed information, see Technical Specifications on page 26. All physical connections use industry-standard cabling and connectors. The network and serial ports are on the rear panel of the SLC console manager, and the console port is on the front. Required cables and adapters for certain servers, switches, and other products are available from Lantronix at www.lantronix.com. Serial Connections All devices attached to the device ports and the console port must support the RS-232C (EIA-232) standard. Category 5 cabling with RJ45 connections is used for the device port connections and for the console port. For pinout information, see 5: Adapters and Pinouts on page 272. Note: RJ45 to DB9/DB25 adapters are available from Lantronix. Device ports and the console port support eight baud-rate options: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200 baud. The ports are shown in Figure 2-4 and Figure 2-5. Figure 2-4 Device Port Connections SLC™ Console Manager User Guide 22