Lenovo B470e Lenovo B470/B470e Hardware Maintenance Manual - Page 52

Optical drive, Attention, Removal steps of hard disk drive, When installing

Get Lenovo B470e PDF manuals and user guides View all Lenovo B470e manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Attention: • Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • Before removing the drive, have the user make a backup copy of all the information on it if possible. • Never remove the drive while the computer is operating or is in suspend mode. Removal steps of hard disk drive Remove screws 1 , pull the tab in the direction shown by the arrow 2 , and then remove the hard disk drive from the slot. 1 2 Step 1 Screw (quantity) M2 × 5 mm, flat-head, nylon-coated (1) When installing: Make sure the HDD connector is attached firmly. 1050 Optical drive For access, remove this FRU: • "1010 Battery pack" on page 44 Color Black Torque 1.6 kgfcm 46 Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Attention:
•
Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
•
Before removing the drive, have the user make a backup copy of all the information on it if possible.
•
Never remove the drive while the computer is operating or is in suspend mode.
Removal steps of hard disk drive
Remove screws
1
, pull the tab in the direction shown by the arrow
2
, and then remove the hard disk
drive from the slot.
2
1
Step
Screw (quantity)
Color
Torque
1
M2 × 5 mm, flat-head, nylon-coated (1)
Black
1.6 kgfcm
When installing:
Make sure the HDD connector is attached firmly.
1050 Optical drive
For access, remove this FRU:
•
“1010 Battery pack” on page 44
46
Hardware Maintenance Manual