Lenovo B470e Lenovo B470/B470e Hardware Maintenance Manual - Page 68
LCD front bezel, If the Windows Certificate of Authentication label COA
View all Lenovo B470e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. If the Windows Certificate of Authentication label (COA) b is attached to a part that is replaced, return the old part with the label attached to the customer, or provide a letter to the customer stating what the label was originally on the system and what the label part number, serial number, and product key were. The following labels need to be peeled off from the old base cover, and need to be put on the new base cover. a Palmrest label c Rating label d Wistron label e PRC/MTM label f VODAFONE label g Indonesia WLAN&BT label h Malaysia SIRIM label I Brazil label or BT label for US/CA/TW j Brazil Label (WLAN) or WLAN label for US/CA/TW or Israel label for WLAN k Indonesia D side label l PPT label For some models, you need to apply two FCC labels. Check the old base cover; if it has two FCC labels, apply both to the new base cover. For the location of each label, refer to the following figure: b c d e h g i f j kl 1150 LCD front bezel For access, remove these FRUs in order: • "1010 Battery pack" on page 44 • "1020 Dummy card" on page 44 • "1030 Bottom slot cover" on page 45 • "1040 Hard disk drive" on page 45 • "1050 Optical drive" on page 46 • "1060 Memory modules" on page 47 • "1070 PCI Express Mini Card for wireless LAN/WAN" on page 48 • "1080 Keyboard" on page 49 • "1090 Keyboard bezel" on page 51 • "1100 System board assembly" on page 53 • "1110 LCD unit" on page 55 62 Hardware Maintenance Manual