Lenovo Edge 15 Laptop Hardware Maintenance Manual - Lenovo Flex 2 Pro-15, Leno - Page 49
For integrated graphic, Removal steps of fan assembly and heat sink assembly continued
View all Lenovo Edge 15 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Lenovo Flex 2 Pro-15/Edge 15 Figure 8. Removal steps of fan assembly and heat sink assembly (continued) For integrated graphic: Unplug the fan connector in the direction shown by arrow a, loosen the three screws b and then remove the fan and heat sink assembly by arrow c. 22 3 1 Step Screw (quantity) b M 2× 4.0 mm, flat‐head, nylok‐coated (3) Color Torque Silver 1.85±0.15kgfcm When installing: Make sure that the fan connector is attached firmly to the system board. 45
Lenovo Flex 2 Pro-15/Edge 15
45
Figure 8. Removal steps of fan assembly and heat sink assembly (continued)
For integrated graphic:
Unplug the fan connector in the direction shown by arrow
, loosen the three
screws
and then remove the fan and heat sink assembly by arrow
When installing:
Make sure that the fan connector is attached firmly to the
system board.
Step
Screw (quantity)
Color
Torque
M 2× 4.0 mm, flat
‐
head, nylok
‐
coated (3)
Silver
1.85±0.15kgfcm
a
b
c
2
3
2
1
b