Lenovo G555 Lenovo G555 Hardware Maintenance Manual V2.0 - Page 47
Removal steps of fan assembly and heat sink assembly continued, additional thermal rubber
View all Lenovo G555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Lenovo G555 Figure 7. Removal steps of fan assembly and heat sink assembly (continued) Peel off the adhesive tape in the direction shown by arrow 6 to detach the fan assembly and the heat sink assembly. 6 c a b When installing: •• Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, to the a part shown in the figure above. Either too much or too less grease application can cause a thermal problem due to imperfect contact with a component. You also need to peel the thin film off from the rubber b . In models with the discrete graphics chip, there is an additional thermal rubber c whose film to be peeled off. •• Use an adhesive tape to make sure that the fan assembly and the heat sink assembly are attached firmly. 43