Lenovo Horizon 2 27 Table PC Lenovo Horizon 2 27 All-In-One PC Hardware Mainte - Page 32

Step 6. Push out the latches on both sides of the memory socket to release the memory module. Gently pull the memory module upward to remove it from its socket. Step 7. To install the new memory module: a. Align the new memory module with the memory socket, then insert it and push down on the top edge. b. Make sure the latches lock the memory module in place. c. Reconnect the battery cable to the connector on the motherboard. Step 8. Reattach the rear cover. Replacing the Wi-Fi card Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the base cover. To replace the Wi-Fi card: Step 1. Step 2. Step 3. Step 4. Step 5. Step 6. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Unplug all power cords from electrical outlets. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right view" and "Rear view" for help with locating the various connectors. Remove the rear cover. Refer to "Removing the rear cover". Remove the EMI cover. Refer to "Removing the EMI cover". Disconnect the battery cable from the connector on motherboard. Refer to "Replacing the battery". 26 IdeaCentre Horizon 2 27 All-In-One PC Hardware Maintenance Manual