Lenovo Horizon 2 27 Table PC Lenovo Horizon 2 27 All-In-One PC Hardware Mainte - Page 41
ReplacingtheLEDpanelmodule
View all Lenovo Horizon 2 27 Table PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Step 5. Remove the two screws that secure the camera and bracket to the front bezel. Lift up the camera and bracket to remove it. Step 6. Remove the camera from bracket by removing the two screws and disconnect the data cable from the camera. Step 7. To install the new camera: a. Connect the data cable to the new camera. b. Secure the new camera to the bracket with the two screws. c. Line up the holes in the bracket with the mounting holes on the front bezel and secure the new camera with the two screws. Step 8. Reattach the rear cover. Replacing the LED panel module Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the base cover. Chapter 7. Replacing hardware 35
Step5.Removethetwoscrewsthatsecurethecameraandbrackettothefrontbezel.Liftupthecamera
andbrackettoremoveit.
Step6.Removethecamerafrombracketbyremovingthetwoscrewsanddisconnectthedatacable
fromthecamera.
Step7. To install the new camera:
a.Connectthedatacabletothenewcamera.
b.Securethenewcameratothebracketwiththetwoscrews.
c.Lineuptheholesinthebracketwiththemountingholesonthefrontbezelandsecurethe
newcamerawiththetwoscrews.
Step8. Reattach the rear cover.
ReplacingtheLEDpanelmodule
Note:
Turnoffthecomputerandwait3to5minutestoletitcooldownbeforeremovingthebasecover.
Chapter 7
.
Replacing hardware
35