Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 2292, 6343, 634 - Page 91
Miscellaneous, error, messages
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Miscellaneous error messages Message/Symptom CMOS Backup Battery inaccurate Changing colors Computer will not power-off. See "Power Supply Errors" on page 47. Computer will not RPL from server Computer will not Wake On LAN (if applicable) Dead computer. See "Power Supply Errors" on page 47. Diskette drive in-use light remains on or does not light when drive is active. Flashing cursor with an otherwise blank display. Incorrect memory size during POST FRU/Action 1. CMOS Backup Battery (see "Safety information" on page 187) 2. System Board 1. Display 1. Power Switch 2. System Board 3. Riser card 1. Ensure that network is in startup sequence as first device or first device after diskette 2. Ensure that network adapter is enabled for RPL 3. Network adapter (Advise network administrator of new MAC address) 1. Check power supply and signal cable connections to network adapter 2. Ensure that the operating system settings are set to enable Wake on LAN 3. Ensure Wake On LAN feature is enabled in Setup/Configuration (see "Setup Utility program" on page 14) 4. Ensure network administrator is using correct MAC address 5. Ensure no interrupt or I/O address conflicts 6. Network adapter (advise network administrator of new MAC address) 1. Power Supply 2. System Board 3. Riser card 1. Diskette Drive 2. System Board 3. Diskette Drive Cable 4. Riser card 1. System Board 2. Primary Hard Disk Drive 3. Hard Disk Drive Cable 4. Riser card 1. Run the Memory tests 2. Memory Module 3. System Board Chapter 7. Symptom-to-FRU index 85