Lenovo PC 300GL User Guide (including system setup and option in - Page 98
Power-On Self-Test (POST), Power On Status
![]() |
View all Lenovo PC 300GL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Power-On Self-Test (POST) Each time you turn on your computer, it performs a series of tests that check the basic operation of the base computer. This series of tests is called the power-on self-test (POST). POST does the following: Checks basic system-board operations Checks the memory operation Compares the current system configuration with that established by the Configuration/Setup Utility Program Starts the video operation Verifies that the diskette drives are working Verifies that the hard disk drive and the CD-ROM drive are working If Power-On Self-Test is set to [Enhanced], numbers showing the amount of memory being tested appear in the top-left corner of the screen until the total amount of memory in the system is reached. Options for running a quick POST or accessing the Configuration/Setup Utility Program appear in the lower-left corner of the screen. Quick mode is the default mode of operation. Note: The amount of available memory shown might be somewhat less than expected because of basic input/output system (BIOS) shadowing in random access memory (RAM). If POST finishes without detecting any problems, the first screen of your operating system or application program appears if you have not set a power-on password. If you have set a power-on password, a password prompt appears. You must enter your password before the first screen of your operating system or application program will appear. (For more information on using passwords, see "Power-On Password" on page 30.) If Power On Status is Enabled and POST detects a problem, you will hear multiple beeps or no beep. In most cases, an error code appears in the top left corner of the screen, and in some cases a description of the error is displayed beside the code. (Note that the screen will sometimes display multiple error codes and descriptions.) For more information about what caused an error message to appear and what action to take, see "Solving POST Error Message Problems" on page 86 and "POST Message Charts" on page 88. If you hear no beep at all during POST, see "Troubleshooting Charts" on page 105. You might need to have your computer serviced. 84 PC 300GL User Guide
![](/manual_guide/products/lenovo-pc-300gl-user-guide-including-setup-option-installation-989f7d3/98.png)