Lenovo Q200 Q200 Hardware Replacement Guide - Page 14
Replacing hardware
View all Lenovo Q200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Chapter Replacing hardware Attention Do not remove the computer cover or attempt any repair before reading the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://www.lenovo.com/support. Note Use only parts provided by Lenovo. Opening the computer cover Important Turn off the computer and wait 3 to 5 minutes to let the computer cool before opening the computer cover. To open the computer cover: 1. Remove any media (diskettes, CDs, or tapes) from the drives, shut down your operating system, turn off all attached devices, and the computer. 2. Unplug all power cords from electrical outlets. 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Locating connectors on the rear of the computer". 4. Press the buttons on the sides of the computer and pivot the cover upward to open the computer as shown. Hardware Replacement Guide 11 31032756_HaWaii-HRG_EN.indd 11 2008.1.8 3:31:31 PM