Lenovo Q200 Q200 Hardware Replacement Guide - Page 30
Important
View all Lenovo Q200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
12. Holding the microprocessor with your fingers, position the microprocessor so that the notches on the microprocessor are aligned with the tabs in the microprocessor socket. Important To avoid damaging the microprocessor contacts, do not tilt the microprocessor when installing it into the socket. 13. Lower the microprocessor straight down into the system board socket of the system board. 14. To secure the microprocessor in the socket, close the microprocessor retainer and lock it into position with the small handle. 15. Use the thermal grease syringe to place five drops of grease on the top of the microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the grease syringe). 31032756_HaWaii-HRG_EN.indd 27 Hardware Replacement Guide 27 2008.1.8 3:31:39 PM