Lenovo S310 Lenovo S310 All-In-One Hardware Maintenance Manual - Page 75
Mouse Port interface Test Passed, Mouse Port interface IRQ failure
View all Lenovo S310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Diagnostic Error Code FRU/Action 080-199-XXX Game Port interface test failed, cause unknown 1. See "Undetermined problems" on page 76. 2. Flash the system and re-test. See "Flash update procedures" on page 127. 3. Replace component under function test. 086-000-XXX Mouse Port interface Test Passed No action 086-001-XXX Mouse Port interface Presence 1. Mouse 2. System board 086-032-XXX Mouse Port interface Device controller failure 1. Mouse 2. System board 086-035-XXX Mouse Port interface Reset 1. Mouse 2. System board 086-040-XXX Mouse Port interface IRQ failure 1. Run the Setup Utility program. 2. Mouse 3. System board 086-195-XXX Mouse Port interface Test aborted by user Information only Restart the test, if necessary. 086-196-XXX Mouse Port interface test halt, error threshold exceeded 1. Press F3 to review the log file. 2. Restart the test to reset the log file. 086-197-XXX Mouse Port interface test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 51. 2. Re-run test. 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 086-198-XXX Mouse Port interface test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 51. 2. Flash the system and re-test. See "Flash update procedures" on page 127. 3. Go to "Undetermined problems" on page 76. 086-199-XXX Mouse Port interface test failed, cause unknown 1. See "Undetermined problems" on page 76. 2. Flash the system and re-test. See "Flash update procedures" on page 127. 3. Replace component under function test. 089-000-XXX Microprocessor Test Passed No action 089-XXX-XXX Microprocessor failure 1. Microprocessor(s) 2. System board 089-195-XXX Microprocessor Test aborted by user Information only Restart the test, if necessary. 089-196-XXX Microprocessor test halt, error threshold exceeded 1. Press F3 to review the log file. 2. Restart the test to reset the log file. Chapter 7. Symptom-to-FRU Index 69