Lenovo ThinkCentre M90p Intel Active Management Technology Configuration Guide - Page 23
Uncon Network Access, Remote Setup And Configuration, Current Provisioning Mode
View all Lenovo ThinkCentre M90p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Unconfigure Network Access The Unconfigure Network Access option enables you to reset network settings including network access control lists (ACLs) to factory default settings. Select Unconfigure Network Access and press Enter. Press Y or N when prompted. If you press Y, the following options will be displayed. Option Description Full Unprovision Used to reset all the Intel AMT settings to the factory default settings except the MEBx password. Partial Unprovision Used to reset all the Intel AMT settings to the factory default settings except the PID/PPS and the MEBx password. Remote Setup And Configuration Select Remote Setup And Configuration and press Enter. The INTEL(R) AUTOMATED SETUP AND CONFIGURATION window opens. The following options will be displayed: v "Current Provisioning Mode" v "Provisioning Record" v "RCFG" on page 16 v "Provisioning Server IPV4/IPV6" on page 16 v "Provisioning Server FQDN" on page 16 v "TLS PSK" on page 16 v "TLS PKI" on page 16 Current Provisioning Mode: The Current Provisioning Mode option shows you the current provisioning TLS mode: None, PKI (Public Key Infrastructure), or PSK (Pre-shared Key). Provisioning Record: The Provisioning Record option shows you the provision PSK or PKI record data of your computer. If no data has been entered, a message will be displayed indicating that the provision record is not present. If the record data has been entered, the following provision records will be displayed: v TLS provisioning mode - Displays the current configuration mode of the system: None, PSK, or PKI. v Provisioning IP - Displays the IP of the setup and configuration server. v Date of Provision - Displays the date and time of the provision. v DNS - Indicates whether the PKI DNS suffix was configured in the Intel MEBX before remote configuration takes effect. A value of 0 indicates that the PKI DNS suffix was not configured. A value of 1 indicates that the PKI DNS suffix was configured. v Host Initiated - Displays whether the setup and configuration process was initiated by the host: No indicates the setup and configuration process was not initiated by the host; Yes indicates the setup and configuration process was initiated by the host. (PKI only) v Hash Data - Displays the 40-character certificate hash data. (PKI only) v Hash Algorithm - Describes the hash type. Currently only SHA1 (Secure Hash Algorithm 1) is supported. (PKI only) v Is Default - Displays Yes if the Hash algorithm is the default algorithm. Displays No if the hash algorithm is not the default algorithm. (PKI only) Chapter 5. Intel AMT setup and configuration on Lenovo ThinkCentre M90p desktop computers 15