Lenovo ThinkCentre M90p Intel Active Management Technology Configuration Guide - Page 35

Appendix B. Factory default settings for the Intel MEBx The following table introduces the factory default settings for the Intel MEBx. Table 3. Factory default settings for the Intel MEBx Option Default setting Option Default setting Intel MEBx default admin password Delete PID and PPS This will delete the PID and PPS entries. Intel(R) ME State Control Change ME Password Password Policy Host Name Domain Name Shared/Dedicated FQDN Dynamic DNS Update DHCP Mode IPV6 Feature Selection Activate Network Access ENABLED Blank Blank Remote Configuration PKI DNS Suffix Manage Hashes Blank Blank Shared Local FW Update Qualifier Secure FW Update Set PRTC DISABLED Intel(R) ME ON in Host Sleep States ENABLED Idle Timeout DISABLED Manageability Feature Selection Activates the current Username & network settings and Password opens the ME network interface Continue: (Y/N) ENABLED Blank v VeriSign Class 3 Primary CA-G1 v VeriSign Class 3 Primary CA-G3 v Go Daddy Class 2 CA v Comodo AAA CA v Starfield Class 2 CA v Verisign Class 3 Primary CA-G2 Always Open ENABLED Blank Desktop: ON in S0 65535 ENABLED ENABLED Continue: (Y/N) Unconfigure Network Access Full Unprovision Current Provisioning Mode: Provisioning Mode PKI Provisioning Record Provision Record is not present SOL ENABLED IDER ENABLED Legacy Redirection DISABLED Mode © Copyright Lenovo 2010 27