Lenovo ThinkCentre M90p Intel Active Management Technology Configuration Guide - Page 28
KVM Configuration, Intel(R) Quiet System Technology Configuration, Driver description, MEI
View all Lenovo ThinkCentre M90p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
SOL IDER Legacy Redirection Mode Used to enable or disable SOL. If the client supports SOL and SOL is enabled on the client, the Intel AMT managed client input or output can be redirected to the management server console. If the client does not support SOL, the SOL option cannot be enabled. Used to enable or disable IDE-R. If IDE-R is enabled, the Intel AMT managed client can be booted from remote disk images through a management server console. If the client does not support IDE-R, the IDER option cannot be enabled. Used to enable or disable legacy redirection mode. Legacy redirection mode controls how the redirection works. Attention: The default setting is DISABLED, which is used for enterprise consoles and new Small and Medium Businesses (SMB) consoles. If you are using a legacy SMB Redirection Console, you must set the Legacy Redirection Mode feature to ENABLED. KVM Configuration Select KVM Configuration in the INTEL(R) AMT CONFIGURATION window and press Enter. The KVM Configuration window opens and you can configure the following KVM settings. Option Description KVM Feature Selection Used to enable or disable the KVM feature. User Opt-in Used to specify whether the user consent is required for the KVM session. Opt-in Configurable from Used to enable or disable remote configuration of the User remote IT Opt-in setting. Intel(R) Quiet System Technology Configuration The Intel Quiet System Technology (Intel QST) is the advanced system temperature and fan speed control technology of Intel, which utilizes the internal and external thermal sensors to optimize the acoustic and thermal performance of the computer in steady state and transient power conditions. Select Intel(R) Quiet System Technology Configuration and press Enter. Then, you can enable or disable the Intel QST feature. Driver description This section provides information about AMT drivers. Read the following driver descriptions if you are going to use Intel AMT in the Microsoft Windows® environment. MEI The Intel AMT Management Engine Interface (MEI) is the interface between the host and the Intel ME. The Intel AMT MEI is bi-directional so that both the host and the Intel AMT firmware can initiate transactions. In addition, transactions can be completed by the Intel ME first and then the host can be synchronized with the Intel ME later. 20 ThinkCentre M90p with Intel AMT Configuration Guide