Lenovo ThinkPad 560E ThinkPad 560X Hardware Maintenance Manual (Oct 1997) - Page 48
FRU / Action in Sequence, Battery Pack
View all Lenovo ThinkPad 560E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Symptom / Error 184 (Power-on password check sum error.) 185 (The startup sequence is not valid. Suspect that power was off when the startup sequence was being updated.) 186 190 (A depleted battery pack was installed when the power was on.) 191XX (PM initialization error.) 195 (The configuration read from the hibernation area does not match the actual configuration.) 196 (A read error occurred in the hibernation area of the hard disk drive.) 199XX (Resume error.) 1XX 2XX 201: Memory data error. 202: Memory line error 00-15. 203: Memory line error 16-23. 205: Memory test failure on on-board memory. 221: ROM to RAM remap error. 301, 303, 304, 305, 3XX (301: Keyboard error.) FRU / Action in Sequence 1. Reset the power-on password in Easy-Setup. 1. Reset the startup sequence in Easy-Setup. 1. System Board. 1. Go to "Checking the Battery Pack" on page 31. 1. System board. 1. Check if the configuration was changed. For example, check if a DIMM card was added. 1. Run the hard disk drive test. 2. Hard disk drive. 1. System board. 1. System board. 1. Go to "Memory Checkout" on page 28. 2. DIMM card. 3. System board. 1. Go to "Keyboard or Auxiliary Input Device Checkout" on page 27. 2. Keyboard. 3. External numeric keypad. 4. External keyboard. 5. Keyboard/mouse cable. 6. System board. 38 IBM ThinkPad 560X (2640-60x, 70x) HMM