Lenovo ThinkPad Edge E330 (English) User Guide - Page 100

Menu item, Selection, Comments, AC Only, AC and, Battery, Enabled, Network, Disabled

Page 100 highlights

Table 4. Config menu items Menu item Submenu item Network Wake On LAN Selection • Disabled • AC Only • AC and Battery USB Ethernet LAN Option ROM • Disabled • Enabled Wireless LAN Radio • On • Off USB UEFI BIOS Support Always On USB • Disabled • Enabled • Disabled • Enabled Always On USB Charge in off mode • Disabled • Enabled 86 User Guide Comments Enable the system to Power on when the Ethernet controller receives a magic packet. If you select AC Only, Wake on LAN is enabled only when ac power adapter is attached. If you select AC and Battery, Wake on LAN is enabled with any power sources. Note: AC is required with magic packet type Wake on LAN. Note: Wake on LAN function does not work when a hard disk password is set. Loads the Ethernet LAN Option ROM to enable startup from an integrated network device. If you select On, the internal wireless radio is turned on. If you select Off, the internal wireless radio is turned off. Enables or disables boot support for USB diskette and USB CD-ROM. If you select Disabled, the external USB devices cannot be charged through USB connectors in power-off mode. If you select Enabled, the Always On USB connector enables you to charge some mobile digital devices and smartphones, by attaching the devices to the connector in power-off mode. Note: If you want to charge these devices when your computer is in hibernation mode or powered off, you will need to open the Power Manager program and configure corresponding settings to enable the Always On USB connector.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156

Table 4. Config menu items
Menu item
Submenu item
Selection
Comments
Wake On LAN
Disabled
AC Only
AC and Battery
Enable the system to Power
on when the Ethernet
controller receives a magic
packet.
If you select
AC Only
, Wake
on LAN is enabled only
when ac power adapter is
attached.
If you select
AC and
Battery
, Wake on LAN is
enabled with any power
sources.
Note:
AC is required with
magic packet type Wake on
LAN.
Note:
Wake on LAN
function does not work
when a hard disk password
is set.
Ethernet LAN Option ROM
Disabled
Enabled
Loads the Ethernet LAN
Option ROM to enable
startup from an integrated
network device.
Network
Wireless LAN Radio
On
Off
If you select
On
, the internal
wireless radio is turned on.
If you select
Off
, the internal
wireless radio is turned off.
USB UEFI BIOS Support
Disabled
Enabled
Enables or disables boot
support for USB diskette
and USB CD-ROM.
Always On USB
Disabled
Enabled
If you select
Disabled
, the
external USB devices
cannot be charged
through USB connectors in
power-off mode.
USB
Always On USB Charge in
off mode
Disabled
Enabled
If you select
Enabled
, the
Always On USB connector
enables you to charge some
mobile digital devices and
smartphones, by attaching
the devices to the connector
in power-off mode.
Note:
If you want to charge
these devices when your
computer is in hibernation
mode or powered off, you
will need to open the Power
Manager program and
configure corresponding
settings to enable the
Always On USB connector.
86
User Guide