Lenovo ThinkPad L430 (English) User Guide - Page 124
Installing other device drivers and software, ThinkPad Setup, for Display Properties.
View all Lenovo ThinkPad L430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
10. Click Have Disk. 11. Specify the path where the monitor INF file is saved, then click Open. 12. Click OK. 13. Confirm the correct display type, then click Next. 14. Windows has finished installing. Click Close. 15. Click Close for Display Properties. 16. Click OK in the Monitor tab. 17. Click OK and close the Display Settings window. Installing other device drivers and software The other device drivers are provided in the C:\SWTOOLS\DRIVERS directory on your hard disk drive. You will also need to install application software, which is provided in the C:\SWTOOLS\APPS directory on your hard disk drive. To do this, refer to the instructions in "Reinstalling preinstalled applications and device drivers" on page 63. Note: If you cannot find the Supplement files, device drivers, and application software you need on your hard disk drive, or if you want to receive updates and the latest information about them, refer to the ThinkPad Web site: http://www.lenovo.com/ThinkPadDrivers ThinkPad Setup Your computer comes with the ThinkPad Setup program to enable you to select various setup parameters. To start ThinkPad Setup, do the following: 1. Turn on the computer. When the ThinkPad logo is displayed, press the F1 key. The ThinkPad Setup program main menu opens. Note: If you have set a supervisor password, the ThinkPad Setup program main menu will be displayed after you enter the password. You can start ThinkPad Setup by pressing Enter instead of entering the supervisor password. However, you cannot change the parameters that are protected by the supervisor password. For more information, refer to "Using passwords" on page 47. 2. Using the cursor keys, move to an item you want to change. When the item is highlighted, press Enter. A submenu is displayed. 3. Change the items you wish to change. To change the value of an item, do the following: • F6 or the combination of Shift and + : Change to a higher value. • F5 or - : Change to a lower value. If the item has a submenu, press Enter to display it. 4. Press Esc to exit from the submenu. 5. If you are on a nested submenu, press Esc repeatedly until you reach the ThinkPad Setup program main menu. Note: If you need to restore the settings to their original state as of the time of purchase, press F9 to load the default settings. You also can select an option on the Restart submenu to load the default settings or discard the changes. 6. Select Restart. Move the cursor to the option you want for restarting your computer; then press Enter. Your computer restarts. 106 User Guide