Lenovo ThinkPad L430 (English) User Guide - Page 126
Menu item, Selection, Comments, Legacy only, UEFI first, Enabled, UEFI Only, Disabled
View all Lenovo ThinkPad L430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Table 4. Config menu items (continued) Menu item Submenu item Selection USB Ethernet LAN Option ROM • Disabled (for Legacy only boot mode • Enabled or Both with UEFI first) UEFI IPv4 Network Stack (for UEFI Only boot mode or Both with UEFI first) • Disabled • Enabled USB UEFI BIOS Support • Disabled • Enabled Always On USB • Disabled • Enabled Always On USB Charge in • Disabled Off Mode • Enabled USB 3.0 Mode • Auto • Enabled • Disabled 108 User Guide Comments Note: The Wake on LAN function does not work when a hard disk password is set. Load the Ethernet LAN Option ROM to enable startup from an integrated network device. Enable or disable Internet Protocol Version 4 (IPv4) network stack for the UEFI environment. Enable or disable boot support for USB storage devices, such as USB memory key and USB optical disk drive. If you select Enabled, the external USB devices can be charged through USB connectors even when the computer is in low power mode (sleep, hibernate, or power-off). If you select Enabled, the Always On USB connector enables you to charge some devices, such as iPod, iPhone and BlackBerry smartphones when the computer is turned off. Note: If you want to charge these devices when your computer is turned off, you will need to open the Power Manager program and configure corresponding settings to enable the Always On USB connector function. For details about how to enable the Always On USB connector function, refer to the online help information system of the Power Manager program. The USB 3.0 function only works in the Windows 7 operating system. If you are using other Windows operating system rather than Windows 7, the USB