Lenovo ThinkServer Storage SA120 (English) User Guide and Hardware Maintenance - Page 11
or 16 American Wire Gauge AWG copper conductor only, not exceeding 3 meters
View all Lenovo ThinkServer Storage SA120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Statement 16 CAUTION: To reduce the risk of electric shock or energy hazards: • This equipment must be installed by trained service personnel in a restricted-access location, as defined by your local electrical code and the latest edition of IEC 60950. • Connect the equipment to a reliably earthed safety extra low voltage (SELV) source. An SELV source is a secondary circuit that is designed so that normal and single fault conditions do not cause the voltages to exceed a safe level (60 V direct current). • The branch circuit overcurrent protection must be rated in accordance with local electrical code requirements. • Use 1.3 mm2 or 16 American Wire Gauge (AWG) copper conductor only, not exceeding 3 meters in length. • Torque the wiring-terminal screws to 1.4 newton-meters or 12 inch-pounds. • Provide a readily available, approved and rated disconnect device in the field wiring. Statement 17 CAUTION: This product contains a Class 1M laser. Do not view directly with optical instruments. Statement 18 CAUTION: Do not place any object on top of rack-mounted products. Statement 19 CAUTION: Hazardous moving parts. Keep fingers and other body parts away. © Copyright Lenovo 2014 ix