Lenovo ThinkServer Storage SA120 (English) User Guide and Hardware Maintenance - Page 55
Then, tightenthescrews, Removing a fan assembly
![]() |
View all Lenovo ThinkServer Storage SA120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Figure 29. Removing a fan assembly 4. Touch the static-protective package that contains the new fan assembly to any unpainted surface on the outside of the storage array. Then, remove the new fan assembly from the package. 5. Note the orientation of the new fan assembly and slide it into the chassis until it snaps into position. Then, tighten the screws 1 to secure the fan assembly to the chassis. Figure 30. Installing a fan assembly 6. If you are instructed to return the old fan assembly, follow all packaging instructions and use any packaging materials that are supplied to you for shipping. Chapter 6. Installing, removing, or replacing hardware 43
![](/manual_guide/products/lenovo-thinkserver-storage-sa120-english-user-guide-hardware-maintenance-manual-fe7821b/55.png)
Figure 29. Removing a fan assembly
4.Touchthestatic-protectivepackagethatcontainsthenewfanassemblytoanyunpaintedsurfaceonthe
outsideofthestoragearray.Then,removethenewfanassemblyfromthepackage.
5.Notetheorientationofthenewfanassemblyandslideitintothechassisuntilitsnapsintoposition.
Then,tightenthescrews
1
tosecurethefanassemblytothechassis.
Figure30. Installing a fan assembly
6.Ifyouareinstructedtoreturntheoldfanassembly,followallpackaginginstructionsanduseany
packagingmaterialsthataresuppliedtoyouforshipping.
Chapter6
.
Installing,removing,orreplacinghardware
43