Lenovo ThinkStation E30 Hardware Maintenance Manual - Page 100
Flex the sides of the blue bracket to remove the hard disk drive from the bracket.
View all Lenovo ThinkStation E30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
5. Press the blue release tab 1 down, slide the hard disk drive cage 2 to the rear of the computer, and then pivot it outward. Figure 27. Removing the primary hard disk drive 6. Remove the hard disk drive cage from the chassis by sliding it outward. 7. Pull on the blue handle 3 to release and remove the hard disk drive from the drive cage. 8. Flex the sides of the blue bracket to remove the hard disk drive from the bracket. 9. To install a new hard disk drive into the blue bracket, flex the bracket and align pin 1 , pin 2 , pin 3 , and pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit board 5 on the bottom of the hard disk drive. Figure 28. Installing the hard disk drive into the bracket 94 ThinkStation Hardware Maintenance Manual