Lenovo ThinkStation E30 Hardware Maintenance Manual - Page 59
PCI Interface Test Passed
View all Lenovo ThinkStation E30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Diagnostic Error Code 018-250-XXX PCI Card Services error 020-000-XXX PCI Interface Test Passed 020-0XX-XXX PCI Interface error 020-195-XXX PCI Test aborted by user 020-196-XXX PCI test halt, error threshold exceeded 020-197-XXX PCI test warning 020-198-XXX PCI test aborted 020-199-XXX PCI test failed, cause unknown 020-262-XXXPCI system error 025-000-XXXIDE interface Test Passed 025-00X-XXX 025-01X-XXX IDE interface failure 025-027-XXX IDE interface Configuration/Setup error FRU/Action 1. PCI card 2. Riser card, if installed. 3. System board No action 1. PCI card 2. Riser card, if installed. 3. System board Information only Restart the test, if necessary 1. Press F3 to review the log file. 2. Restart the test to reset the log file. 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 37. 2. Re-run test. 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 37. 2. Flash the system and re-test. See "Updating (flashing) the BIOS" on page 169. 3. Go to "Undetermined problems" on page 65. 1. Go to "Undetermined problems" on page 65. 2. Flash the system and re-test. See "Updating (flashing) the BIOS" on page 169. 3. Replace component under function test. 1. PCI card 2. Riser card, if installed. 3. System board No action 1. IDE signal cable 2. Check power supply voltages. 3. Reseat IDE signal cable. 4. IDE device 5. System board 1. IDE signal cable 2. Flash the system. See "Updating (flashing) the BIOS" on page 169. 3. Reseat IDE signal cable. 4. IDE device 5. System board Chapter 8. Symptom-to-FRU Index 53