Lexmark 15W0003 Setup Guide - Page 30
Installing memory cards, Complete the steps in, Removing the, system board, on if the system
UPC - 734646300032
View all Lexmark 15W0003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installing memory cards Note: Memory options designed for other Lexmark printers may not work with your printer. For more information, refer to the Lexmark C720 online information. Resident code card DO NOT REMOVE Memory connectors Your printer comes with at least 32MB already installed. (Some printer models may have more standard memory.) You can purchase many different memory options from Lexmark for the three memory connectors in your printer. The maximum amount of usable memory is 384MB. Use SDRAM DIMM memory cards that meet the following criteria: • 100MHz or greater • 100 pin • 4K refresh rate • Unbuffered, non ECC • x32 • 3.3 V If you need to remove a memory card, refer to the Lexmark C720 online information. To install optional memory: 1 Complete the steps in "Removing the system board" on page 23 if the system board is still installed. 2 Locate the memory connectors on the sys- tem board. Each connector can support either a printer memory card or a flash memory card. You cannot operate the printer with more than one flash memory card installed. Option slot Option slot cover Note: Your printer may not have a resident code card. 26 Install memory and network options