Lexmark 15W0003 Setup Guide - Page 37
Installing a hard disk, system board
UPC - 734646300032
View all Lexmark 15W0003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installing a hard disk You can purchase a hard disk option from Lexmark. You must assemble the hard disk option and attach it to the system board. If you use a third-party hard disk, it must meet the following criteria: • 2.5-inch platter • ATA-2 (IDE) interface • Maximum thickness of 13 mm (0.51 in.) • 3.2GB minimum hard disk capacity • 10GB maximum hard disk capacity You need a number 2 Phillips screwdriver to attach the hard disk to the mounting plate. Warning! System board electrical components are easily damaged by static electricity. Touch something metal before you touch any system board electronic components or connectors. Attachment screws Ribbon cable 1 Complete the steps in "Removing the system board" on page 23 if the system board is still installed. Place the system board on a flat, level, and stable surface. 2 Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package. Mounting plate Hard disk Install memory and network options 33