Lexmark 15W0003 Setup Guide - Page 48
Remove the top access panel., Pry outward on the rear tab covers and, remove them.
UPC - 734646300032
View all Lexmark 15W0003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Note: If you are installing the duplex unit after initial printer setup, you must have previously installed an optional drawer. Top access panel 3 Remove the top access panel. Push in on the bottom edge of the top access panel. Then lift upward to remove it. 4 Pry outward on the rear tab covers and remove them. You may need to use a small flathead screwdriver to remove the rear tab covers. Tabs 44 Install the optional duplex unit
44
Install the optional duplex unit
Note:
If you are installing the duplex
unit after initial printer setup, you must
have previously installed an optional
drawer.
3
Remove the top access panel.
Push in on the bottom edge of the top access
panel. Then lift upward to remove it.
4
Pry outward on the rear tab covers and
remove them.
You may need to use a small flathead screw-
driver to remove the rear tab covers.
Top access panel
Tabs