Lexmark 15W0003 Setup Guide - Page 99

95

Configure the network printer

Printer operator panel

A simple way to set the IP address, netmask, and

gateway inside the print server is to use the opera-

tor panel. You need to be standing at the printer to

use this method.

Note:

“X” designates option slot in the

printer being used. For example, if you

install the MarkNet card in option slot 2,

the operator panel selection shows:

Net-

work Option 2

.

1

From the operator panel, choose

Network

Menu

,

Network Option X

,

Network Option X

Setup

,

TCP/IP

,

Set IP Address

. (Hint:

Press

Menu>

until you see the correct menu item,

and then press

Select

.

)

2

When the current IP address appears, use

the menu buttons to change the address.

(Hint

: Press

Select

to advance to the next

segment in the address. Press

Menu

>

to

increase the number by one.

<

Menu

to

decrease the number by one

.)

3

Press

Select

until the word

SAVED

appears

briefly.

4

Repeat steps 1 through 3 to Set IP Netmask

and then again to Set IP Gateway.

5

Print a new network setup page to verify

the parameters are set as you intended.

Static ARP and telnet

You can use this method from any Windows,

OS/2, or UNIX computer. You need to know the

physical address of the print server to use this

method.

Note:

The computer and the printer

must be on the same subnet.

1

Find the physical address (UAA) of the

print server (for example, 00200022012F) on

the network setup page you printed earlier.

If you have an Ethernet network, use the

number in the right column (canonical). If

Section	Page
Table of contents	3
Using your documentation 1	3
Step 1: Select a location foryourprinter 3	3
Step 2: Unpack and position the optional drawer 7	3
Step 3: Unpack and position the printer 9	3
Step 4: Set up the optional drawer 15	3
Step 5: Install memory and network options 23	3
Step 6: Install the optional duplex unit 43	3
Step 7: Install supplies 49	3
Step 8: Attach the cables 61	3
Step 9: Load the paper tray 65	3
Step 10: Verify setup 75	3
Step 11: Load MarkVision and drivers 89	3
Step 12: Configure the network printer 91	3
Using your documentation	5
About this book	5
Step 1: Select a location foryourprinter	7
Allowing enough space	7
Considering environmental issues	9
Moving the printer	10
Step 2: Unpack and position the optional drawer	11
Step 3: Unpack and position the printer	13
Position the printer	15
Identifying printer parts	18
Step 4: Set up the optional drawer	19
Step 5: Install memory and network options	27
Removing the systemboard	27
Installing memory cards	30
Flash memory option	33
Installing a hard disk	37
Installing printer option cards	41
Installing the rearcover and systemboard	43
Step 6: Install the optional duplex unit	47
Step 7: Install supplies	53
Installing the oil bottle and cleaning roll	53
Installing the photo developer cartridge	57
Installing the tonercartridges	61
Attach the Quick Reference Card	64
Step 8: Attach the cables	65
Step 9: Load the paper tray	69
Loading envelopes	72
Loading the optional legal paper tray	74
Step 10: Verify setup	79
Changing the PaperType setting	81
Adjusting tray2 and duplex unit margins	84
Step 11: Load MarkVision and drivers	93
Congratulations!	94
Step 12: Configure the network printer	95
Printing a network setup page	95
Configuring and printing	98
TCP/IP	98
Novell NetWare	104
AppleTalk	105
OS/2 Warp Server	107
Network printer troubleshooting	107
Index	113
A	113
C	113
D	113
E	113
F	113
H	113
I	113
L	113
M	114
N	114
O	114
P	114
Q	114
R	114
S	114
T	114
U	115
V	115

Lexmark 15W0003 Setup Guide - Page 99

Repeat steps 1 through 3 to Set IP Netmask, until you see the correct menu item

Page 99 highlights