Lexmark 19Z0100 User Guide - Page 108
Setting the outgoing fax name and number, Setting the date and time, Sending a fax
UPC - 734646150132
View all Lexmark 19Z0100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Setting the outgoing fax name and number To have the designated fax name and fax number printed on outgoing faxes: 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the address in the TCP/IP section. 2 Click Settings. 3 Click Fax Settings. 4 Click Analog Fax Setup. 5 Click General Fax Settings. 6 Click inside the Station Name box, and then enter the name to be printed on all outgoing faxes. 7 Click inside the Station Number box, and then enter the printer fax number. 8 Click Submit. Setting the date and time You can set the date and time so that they are printed on every fax you send. If there is a power failure, you may have to reset the date and time. 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the address in the TCP/IP section. 2 Click Settings. 3 Click Security. 4 Click Set Date and Time. 5 Click inside the Set Date & Time box, and then enter the current date and time. 6 Click Submit. Sending a fax Sending a fax using the printer control panel 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, then adjust the paper guides. 3 On the home screen, touch Fax. Faxing 108