Lexmark B2236 Users Guide PDF - Page 41
Paper, Tray Configuration, Universal Setup
View all Lexmark B2236 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Use printer menus 41 Menu item Description Print Timeout Time 1-255 (90*) Set the time in seconds for the printer to end a print job after it has been idle. Note: This menu item appears only when Print Timeout is enabled. Note: An asterisk (*) next to a value indicates the factory default setting. Paper Tray Configuration Menu item Description Default Source Tray [x] (1*) Manual Paper Manual Envelope Set the paper source for all print jobs. Paper Size/Type Tray [x] (1*) Manual Paper Manual Envelope Specify the paper size or paper type loaded in each paper source. Substitute Size Off Letter/A4 All Listed* Set the printer to substitute a specified paper size if the requested size is not loaded in any paper source. Notes: • Off prompts the user to load the required paper size. • Letter/A4 prints an A4‑size document on letter when loading letter, and letter‑size jobs on A4 paper size when loading A4. • All Listed substitutes Letter/A4. Note: An asterisk (*) next to a value indicates the factory default setting. Media Configuration Universal Setup Menu item Description Units of Measure Inches Millimeters Specify the unit of measurement for the universal paper. Note: Inches is the U.S. factory default setting. Millimeters is the international factory default setting. Portrait Width 3.00-14.17 inches (8.50*) 76-360 mm (216*) Set the portrait width of the universal paper. Note: An asterisk (*) next to a value indicates the factory default setting.