Lexmark B2236 Users Guide PDF - Page 72
Clearing jams, Avoiding jams
View all Lexmark B2236 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Troubleshoot a problem 72 To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your printer, press and hold X and simultaneously for 15 seconds If you do not want to accept these risks, then remove the third-party supply or part from your printer and install a genuine Lexmark supply or part. For more information, see "Using genuine Lexmark parts and supplies" on page 60. If the printer does not print after pressing and holding X and the supply usage counter. 1 From the control panel, navigate to: simultaneously for 15 seconds, then reset > Device > > Maintenance > > Config Menu > > Supply Usage And Counters > 2 Select the part or supply that you want to reset, and then select . 3 Read the warning message, and then select Continue > . 4 To clear the message, press and hold X and simultaneously for 15 seconds. Note: If you are unable to reset the supply usage counters, then return the item to the place of purchase. Clearing jams Avoiding jams Load paper properly • Make sure that the paper lies flat in the tray. Correct loading of paper Incorrect loading of paper • Do not load or remove a tray while the printer is printing. • Do not load too much paper. Make sure that the stack height is below the maximum paper fill indicator.