Lexmark C720 Service Manual - Page 194
Print Tests, Single, Continuous
View all Lexmark C720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
5024-001 Print Tests The purpose of the diagnostic print tests is to verify that the printer can print on media from each of the installed input options. For each input source selected, the following choices are available: Single (prints the print test page once). Continuous (continue printing the print test page until Return or Stop is pressed). • Tray 1 = single, Tray 1 = continuous • Tray 2 = single, Tray 2 = continuous (if installed) The contents of the print test page vary depending on the media installed in the selected input source. If a source is selected that contains paper, legal, letter and so on, a page similar to the quick test page is printed. However, the page does not contain the print registration diamonds. If Continuous is selected, all sources printing print the same page continuously until the test is stopped. If continuous is selected for a source containing envelopes, the envelope print test pattern prints on the first envelope and subsequent envelopes are blank. Note: The print test page may be printed on any paper size, however more than one sheet of some media sizes may be required. The print test page is always single sided, regardless of duplex settings or the presence of the duplex unit. To run the print test page: 1. Select Print Tests from the diagnostic menu. 2. Select the media source. 3. Select Single or Continuous. 3-8 Service Manual