Lexmark C720 Service Manual - Page 95

5024-001 Message 35 Res Save Off Deficient Memory 37 Insufficient Collation Area 37 Insufficient Defrag Memory 37 Insufficient Memory Description Action The printer lacks the memory needed to enable Resource Save. This message usually indicates that too much memory is allocated for one or more of the printer link buffers. To enable Resource Save after this message is displayed, either install additional memory or set each link buffer to the Auto value. After you set all link buffers to Auto, exit the printer menus to activate link buffer changes. When Ready is displayed, enable Resource Save in the Setup Menu and modify the link buffers again. Press Go to clear the message. The printer automatically disables Resource Save and continues. This message is displayed when the printer memory used to store pages is too full to collate the print job. Press Go to print the portion of the job already stored and begin collating the rest of the job. Cancel the print job. Press Menu> or or